Doppler Ultrasound (SPI & RVT)

Aliasing

Definition

Aliasing is a display error in pulsed wave and color Doppler where a true velocity exceeding the Nyquist limit is shown incorrectly, wrapping around to appear as flow in the opposite direction. On a spectral waveform the peaks above the limit appear cut off at the top and wrapped to the bottom; on color Doppler it appears as an abrupt switch from one flow color to its opposite. It can be corrected by raising PRF or lowering the baseline; continuous wave Doppler does not alias.

How Aliasing Is Tested on the Registry Exam

SPI and vascular questions ask you to recognize aliasing on a waveform or color image and pick a correct fix, such as raising PRF or lowering the baseline.

ARDMS SPI Exam Overview (2026)

Aliasing is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Video Lessons Covering Aliasing

Review these related video lessons from Prepry's registry review courses.

Textbook & Clinical References

  • Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.

Related Doppler and Hemodynamics Terms

View all 14 terms →

Spectral broadening

Spectral broadening is the filling-in of the normally clear window beneath a spectral Doppler waveform, because a wide range of velocities is present in the sample volume at the same instant. It most often signals turbulent flow, such as at or just past a stenosis, but a sample volume that is too large, a Doppler angle that is too steep, or excessive spectral gain can produce it artificially without any true flow disturbance.

Read definition & exam tips →

Peak systolic velocity

Peak systolic velocity, or PSV, is the highest blood flow velocity recorded during the systolic upstroke of the cardiac cycle on a spectral Doppler waveform. Because velocity must rise as a vessel narrows to keep the same volume of flow moving through a smaller area, PSV is the primary value used to grade arterial stenosis severity, with published thresholds such as greater than 230 cm/s for a 70 percent or greater internal carotid artery stenosis under NASCET criteria.

Read definition & exam tips →

End-diastolic velocity

End-diastolic velocity, or EDV, is the blood flow velocity measured at the end of diastole, just before the next systolic upstroke, on a spectral Doppler waveform. It reflects how much forward flow continues through a vessel during the resting phase of the cardiac cycle, which depends on downstream vascular resistance, and it rises alongside peak systolic velocity as an arterial stenosis worsens toward a pre-occlusive lesion. EDV is combined with PSV to calculate the resistive index.

Read definition & exam tips →

Resistive index

Resistive index, or RI, is a Doppler measurement of downstream resistance to flow, calculated as peak systolic velocity minus end-diastolic velocity, divided by peak systolic velocity. A higher RI reflects greater downstream resistance with little or no diastolic flow, while a lower RI reflects a low-resistance bed with substantial forward flow through diastole. The normal renal artery RI is roughly 0.47 to 0.70, and a renal transplant RI above about 0.8 raises concern for transplant dysfunction.

Read definition & exam tips →

Pulsatility index

Pulsatility index, or PI, is a Doppler measurement of flow resistance, calculated as peak systolic velocity minus end-diastolic velocity, divided by the mean velocity averaged over the cardiac cycle. A higher PI reflects greater downstream resistance, as seen when clenching a fist raises distal resistance in a radial artery waveform, while a lower PI reflects vasodilation, as in the fetal middle cerebral artery brain-sparing response to hypoxia. PI stays defined even with reversed diastolic flow, unlike resistive index.

Read definition & exam tips →

Laminar flow

Laminar flow is the normal pattern of blood movement in a healthy, unobstructed vessel, with concentric layers moving in parallel, fastest at the center and progressively slower toward the vessel wall due to friction. It occurs when the Reynolds number, a unitless value based on flow speed, vessel diameter, density, and viscosity, stays below about 1,500. On a spectral Doppler waveform it produces a narrow band of velocities at each instant, leaving a clear window beneath the waveform.

Read definition & exam tips →