Doppler Ultrasound (SPI & RVT)

Spectral broadening

Definition

Spectral broadening is the filling-in of the normally clear window beneath a spectral Doppler waveform, because a wide range of velocities is present in the sample volume at the same instant. It most often signals turbulent flow, such as at or just past a stenosis, but a sample volume that is too large, a Doppler angle that is too steep, or excessive spectral gain can produce it artificially without any true flow disturbance.

How Spectral broadening Is Tested on the Registry Exam

Vascular questions ask you to interpret spectral broadening as a sign of turbulence while ruling out technical causes like excessive gain or an oversized sample volume.

ARDMS SPI Exam Overview (2026)

Spectral broadening is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Textbook & Clinical References

  • Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.

Related Doppler and Hemodynamics Terms

View all 14 terms →

Peak systolic velocity

Peak systolic velocity, or PSV, is the highest blood flow velocity recorded during the systolic upstroke of the cardiac cycle on a spectral Doppler waveform. Because velocity must rise as a vessel narrows to keep the same volume of flow moving through a smaller area, PSV is the primary value used to grade arterial stenosis severity, with published thresholds such as greater than 230 cm/s for a 70 percent or greater internal carotid artery stenosis under NASCET criteria.

Read definition & exam tips →

End-diastolic velocity

End-diastolic velocity, or EDV, is the blood flow velocity measured at the end of diastole, just before the next systolic upstroke, on a spectral Doppler waveform. It reflects how much forward flow continues through a vessel during the resting phase of the cardiac cycle, which depends on downstream vascular resistance, and it rises alongside peak systolic velocity as an arterial stenosis worsens toward a pre-occlusive lesion. EDV is combined with PSV to calculate the resistive index.

Read definition & exam tips →

Resistive index

Resistive index, or RI, is a Doppler measurement of downstream resistance to flow, calculated as peak systolic velocity minus end-diastolic velocity, divided by peak systolic velocity. A higher RI reflects greater downstream resistance with little or no diastolic flow, while a lower RI reflects a low-resistance bed with substantial forward flow through diastole. The normal renal artery RI is roughly 0.47 to 0.70, and a renal transplant RI above about 0.8 raises concern for transplant dysfunction.

Read definition & exam tips →

Pulsatility index

Pulsatility index, or PI, is a Doppler measurement of flow resistance, calculated as peak systolic velocity minus end-diastolic velocity, divided by the mean velocity averaged over the cardiac cycle. A higher PI reflects greater downstream resistance, as seen when clenching a fist raises distal resistance in a radial artery waveform, while a lower PI reflects vasodilation, as in the fetal middle cerebral artery brain-sparing response to hypoxia. PI stays defined even with reversed diastolic flow, unlike resistive index.

Read definition & exam tips →

Laminar flow

Laminar flow is the normal pattern of blood movement in a healthy, unobstructed vessel, with concentric layers moving in parallel, fastest at the center and progressively slower toward the vessel wall due to friction. It occurs when the Reynolds number, a unitless value based on flow speed, vessel diameter, density, and viscosity, stays below about 1,500. On a spectral Doppler waveform it produces a narrow band of velocities at each instant, leaving a clear window beneath the waveform.

Read definition & exam tips →

Turbulent flow

Turbulent flow is a disorganized pattern in which blood moves in multiple directions and at many velocities at the same location and instant, rather than in smooth parallel layers. It develops when the Reynolds number rises above roughly 2,000, commonly distal to a stenosis, vessel wall irregularity, or high-velocity jet. On a spectral waveform it fills in the window as spectral broadening, and on color Doppler it can appear as a mosaic of mixed colors within the lumen.

Read definition & exam tips →