Turbulent flow
Definition
Turbulent flow is a disorganized pattern in which blood moves in multiple directions and at many velocities at the same location and instant, rather than in smooth parallel layers. It develops when the Reynolds number rises above roughly 2,000, commonly distal to a stenosis, vessel wall irregularity, or high-velocity jet. On a spectral waveform it fills in the window as spectral broadening, and on color Doppler it can appear as a mosaic of mixed colors within the lumen.
How Turbulent flow Is Tested on the Registry Exam
Vascular questions link turbulent flow, and a Reynolds number above about 2,000, to spectral broadening and a color mosaic pattern as indirect signs of stenosis.
ARDMS SPI Exam Overview (2026)
Turbulent flow is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.
- Questions
- 110
- Time Limit
- 2 hours
- Passing Score
- 555 (300-700)
- Test Provider
- Pearson VUE
Official SPI Content Domains
Video Lessons Covering Turbulent flow
Review these related video lessons from Prepry's registry review courses.
Doppler: Part 3
Identify and resolve color Doppler artifacts like twinkle, blooming, and flash artifact. Understand the impact of color write priority and the Nyquist limit on image quality and diagnostic accuracy. ARDMS, ARRT, and CCI registry exam preparation.
Hemodynamics
Explore the principles of hemodynamics, including the relationship between pressure gradients, resistance, and volume flow rate. Understand the continuity equation and differentiate between pulsatile, phasic, and steady flow patterns in the circulatory system. ARDMS, ARRT, and CCI registry exam preparation.
Doppler: Part 2
Explore color Doppler imaging principles, including autocorrelation and the interpretation of velocity and variance maps. Understand how to optimize spectral Doppler displays and identify positive and negative Doppler shifts for accurate flow assessment. ARDMS, ARRT, and CCI registry exam preparation.
1.2 Fluid Dynamics
Review laminar and turbulent flow, pressure and velocity relationships, the continuity equation, and the simplified Bernoulli equation used in cardiac hemodynamics.
Textbook & Clinical References
- Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.
Related Doppler and Hemodynamics Terms
View all 14 terms →Bernoulli principle
The Bernoulli principle states that as a flowing fluid's velocity increases, the pressure it exerts decreases, so total energy stays roughly constant when frictional losses are small. Blood speeds up as it crosses a narrowed vessel segment or stenotic valve to maintain the same volume of flow, so pressure drops at that point and rises again just past it. A simplified version of the equation, pressure gradient equals 4 times velocity squared, converts a measured peak velocity into an estimated pressure gradient.
Read definition & exam tips →
Continuous wave Doppler
Continuous wave Doppler uses two separate piezoelectric elements, one continuously transmitting and one continuously receiving, so it can measure very high velocities accurately without a Nyquist limit or aliasing. Its major limitation is range ambiguity: because it samples along the entire beam at once rather than in pulses, it cannot localize the depth at which a given Doppler signal arose, giving it the poorest axial resolution of any Doppler mode. It still reports both flow speed and direction.
Read definition & exam tips →
Color Doppler
Color Doppler overlays a real-time, color-coded map of blood flow direction and mean velocity onto a grayscale image, using pulsed wave Doppler sampled at many points at once rather than the Fast Fourier Transform used for spectral display. By convention, flow toward the transducer is one color, typically red, and flow away is another, typically blue, with brighter shades showing higher mean velocity. It shares the same Nyquist limit and aliasing behavior as pulsed wave spectral Doppler.
Read definition & exam tips →
Doppler shift
Doppler shift is the difference between the frequency a transducer transmits and the frequency it receives back, caused by relative motion between the transducer and a moving reflector such as red blood cells. It is directly proportional to flow velocity and to transducer frequency, and is largest at a 0 degree angle of incidence and smallest near 90 degrees. Flow moving toward the transducer raises the received frequency, a positive shift, and flow moving away lowers it, a negative shift.
Read definition & exam tips →
Doppler angle
Doppler angle is the angle between the ultrasound beam and the direction of blood flow, and it should be kept at 60 degrees or less, and consistent between measurements, for an accurate velocity estimate. Because the Doppler equation includes the cosine of this angle, error increases sharply beyond 60 degrees, so small inconsistencies in angle correction produce large velocity errors; at 90 degrees, cosine equals zero and no shift is measured regardless of true flow. Tortuous vessels can make holding 60 degrees difficult.
Read definition & exam tips →
Nyquist limit
The Nyquist limit is the highest Doppler shift frequency that pulsed wave or color Doppler can sample and display correctly, equal to half the pulse repetition frequency. A true shift greater than this limit cannot be sampled often enough to display accurately and will alias. Because PRF is tied to depth, decreasing the depth of the sample volume raises PRF and therefore the Nyquist limit, one way to resolve aliasing at high velocities.
Read definition & exam tips →