Doppler shift
Definition
Doppler shift is the difference between the frequency a transducer transmits and the frequency it receives back, caused by relative motion between the transducer and a moving reflector such as red blood cells. It is directly proportional to flow velocity and to transducer frequency, and is largest at a 0 degree angle of incidence and smallest near 90 degrees. Flow moving toward the transducer raises the received frequency, a positive shift, and flow moving away lowers it, a negative shift.
How Doppler shift Is Tested on the Registry Exam
SPI and vascular questions ask how doubling velocity or transducer frequency doubles the Doppler shift, and why a 90 degree angle minimizes it.
ARDMS SPI Exam Overview (2026)
Doppler shift is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.
- Questions
- 110
- Time Limit
- 2 hours
- Passing Score
- 555 (300-700)
- Test Provider
- Pearson VUE
Official SPI Content Domains
Video Lessons Covering Doppler shift
Review these related video lessons from Prepry's registry review courses.
The Basics of Sound: Part 1
Master fundamental ultrasound physics concepts including M-mode and spectral Doppler displays. Understand the relationships between variables like time, depth, and velocity to excel in sonography principles. ARDMS, ARRT, and CCI registry exam preparation.
Doppler: Part 1
Understand the fundamental principles of the Doppler shift and the process of demodulation in ultrasound physics. Learn to calculate Doppler frequency using the difference between transmitted and reflected signals to determine flow direction. ARDMS, ARRT, and CCI registry exam preparation.
Doppler: Part 2
Explore color Doppler imaging principles, including autocorrelation and the interpretation of velocity and variance maps. Understand how to optimize spectral Doppler displays and identify positive and negative Doppler shifts for accurate flow assessment. ARDMS, ARRT, and CCI registry exam preparation.
Ultrasound Instrumentation and Basic Science Lecture
Explore fundamental hemodynamics, waveform analysis, and ultrasound physics essential for vascular imaging. Understand the relationship between pressure, velocity, and Bernoulli's principle in the context of arterial stenosis and blood flow resistance. ARDMS, ARRT, and CCI registry exam preparation.
Textbook & Clinical References
- Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.
Related Doppler and Hemodynamics Terms
View all 14 terms →Doppler angle
Doppler angle is the angle between the ultrasound beam and the direction of blood flow, and it should be kept at 60 degrees or less, and consistent between measurements, for an accurate velocity estimate. Because the Doppler equation includes the cosine of this angle, error increases sharply beyond 60 degrees, so small inconsistencies in angle correction produce large velocity errors; at 90 degrees, cosine equals zero and no shift is measured regardless of true flow. Tortuous vessels can make holding 60 degrees difficult.
Read definition & exam tips →
Nyquist limit
The Nyquist limit is the highest Doppler shift frequency that pulsed wave or color Doppler can sample and display correctly, equal to half the pulse repetition frequency. A true shift greater than this limit cannot be sampled often enough to display accurately and will alias. Because PRF is tied to depth, decreasing the depth of the sample volume raises PRF and therefore the Nyquist limit, one way to resolve aliasing at high velocities.
Read definition & exam tips →
Aliasing
Aliasing is a display error in pulsed wave and color Doppler where a true velocity exceeding the Nyquist limit is shown incorrectly, wrapping around to appear as flow in the opposite direction. On a spectral waveform the peaks above the limit appear cut off at the top and wrapped to the bottom; on color Doppler it appears as an abrupt switch from one flow color to its opposite. It can be corrected by raising PRF or lowering the baseline; continuous wave Doppler does not alias.
Read definition & exam tips →
Spectral broadening
Spectral broadening is the filling-in of the normally clear window beneath a spectral Doppler waveform, because a wide range of velocities is present in the sample volume at the same instant. It most often signals turbulent flow, such as at or just past a stenosis, but a sample volume that is too large, a Doppler angle that is too steep, or excessive spectral gain can produce it artificially without any true flow disturbance.
Read definition & exam tips →
Peak systolic velocity
Peak systolic velocity, or PSV, is the highest blood flow velocity recorded during the systolic upstroke of the cardiac cycle on a spectral Doppler waveform. Because velocity must rise as a vessel narrows to keep the same volume of flow moving through a smaller area, PSV is the primary value used to grade arterial stenosis severity, with published thresholds such as greater than 230 cm/s for a 70 percent or greater internal carotid artery stenosis under NASCET criteria.
Read definition & exam tips →
End-diastolic velocity
End-diastolic velocity, or EDV, is the blood flow velocity measured at the end of diastole, just before the next systolic upstroke, on a spectral Doppler waveform. It reflects how much forward flow continues through a vessel during the resting phase of the cardiac cycle, which depends on downstream vascular resistance, and it rises alongside peak systolic velocity as an arterial stenosis worsens toward a pre-occlusive lesion. EDV is combined with PSV to calculate the resistive index.
Read definition & exam tips →