Frequency
Definition
Frequency is the number of complete sound wave cycles per second, measured in Hertz, and diagnostic ultrasound uses roughly 2 to 18 MHz. It is set by the transducer and stays constant as sound crosses into a new medium, unlike wavelength, which changes with propagation speed. Higher frequency shortens wavelength and improves resolution, but it also raises scattering and attenuation, which is why higher frequencies penetrate less deeply.
How Frequency Is Tested on the Registry Exam
SPI questions give a transmitted, fundamental frequency and ask for the second harmonic, which is always double it.
ARDMS SPI Exam Overview (2026)
Frequency is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.
- Questions
- 110
- Time Limit
- 2 hours
- Passing Score
- 555 (300-700)
- Test Provider
- Pearson VUE
Official SPI Content Domains
Video Lessons Covering Frequency
Review these related video lessons from Prepry's registry review courses.
Abdominal Imaging Optimization
Master the principles of ultrasound physics including frequency, wavelength, and attenuation to optimize abdominal imaging. Learn how to select the appropriate curvilinear or linear transducer based on patient habitus and target depth. ARDMS, ARRT, and CCI registry exam preparation.
Imaging Artifacts - Part 2
Explore equipment-related artifacts including electrical interference, transducer malfunction, and vertical dropout. Master the identification of twinkle artifact for renal calculi and understand the physics behind spectral Doppler aliasing and the Nyquist limit. ARDMS, ARRT, and CCI registry exam preparation.
Pathology of Superficial Structures
Identify abdominal wall pathologies including hernias, hematomas, and foreign bodies using high-frequency linear transducers. Master the sonographic appearance of muscle layers, fascia, and subcutaneous fat to differentiate between abscesses and seromas. ARDMS, ARRT, and CCI registry exam preparation.
Small Parts and Superficial Structures
Explore sonographic evaluation of the thyroid, scrotum, and breast tissue. Master transducer selection for high-resolution imaging of superficial structures and identify key pathologies like testicular torsion and breast malignancy. ARDMS, ARRT, and CCI registry exam preparation.
Textbook & Clinical References
- Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.
Related Ultrasound Physics and Instrumentation Terms
View all 27 terms →Wavelength
Wavelength is the physical length that one complete cycle of a sound wave occupies, equal to propagation speed divided by frequency. Because frequency is fixed by the transducer, wavelength changes only when propagation speed changes, such as when sound crosses into a different medium; a faster medium stretches the wavelength and a slower one shortens it. In soft tissue, wavelength in millimeters is roughly 1.54 divided by frequency in MHz.
Read definition & exam tips →
Period
Period is the time required to complete one full cycle of a sound wave, usually measured in microseconds, and it equals one divided by frequency. Like frequency, period is fixed by the sound source and does not change when the wave enters a different medium, even though wavelength does. A 5 MHz transducer, for example, produces a period of 0.2 microseconds. Pulse repetition frequency and pulse repetition period are separate, related quantities describing how often pulses are sent.
Read definition & exam tips →
Pulse repetition frequency
Pulse repetition frequency, or PRF, is the number of ultrasound pulses the transducer sends out each second, and it has a reciprocal relationship with pulse repetition period. PRF is largely set by imaging depth, since the system must wait for echoes to return from the deepest structure before firing the next pulse, so deeper imaging requires a lower PRF. PRF also sets the Nyquist limit, equal to half of PRF, and pushing PRF very high to raise that limit can cause range ambiguity.
Read definition & exam tips →
Pulse repetition period
Pulse repetition period, or PRP, is the time from the start of one pulse to the start of the next, and it equals one divided by pulse repetition frequency. PRP is made up of pulse duration, the brief transmit time, plus the much longer listening time spent waiting for echoes to return. Increasing imaging depth lengthens PRP because the system must wait longer for the deepest echoes, while decreasing depth shortens it.
Read definition & exam tips →
Spatial pulse length
Spatial pulse length, or SPL, is the physical length of space that one ultrasound pulse occupies, equal to the number of cycles in the pulse multiplied by wavelength. It is set entirely by the transducer and the medium, not by the sonographer or imaging depth, and typically ranges from 0.1 to 1.0 mm clinically. SPL is the only variable that directly sets axial resolution, since axial resolution equals SPL divided by two, so fewer cycles or a shorter wavelength both shorten it.
Read definition & exam tips →
Duty factor
Duty factor is the fraction of time the transducer spends actively transmitting sound rather than listening for echoes, equal to pulse duration divided by pulse repetition period, expressed as a percentage. Pulsed imaging has a duty factor under 1 percent because most of each cycle is spent listening, while continuous wave Doppler transmits constantly and has a duty factor of 100 percent. Increasing imaging depth lengthens listening time and lowers duty factor.
Read definition & exam tips →