Pulse repetition frequency
Definition
Pulse repetition frequency, or PRF, is the number of ultrasound pulses the transducer sends out each second, and it has a reciprocal relationship with pulse repetition period. PRF is largely set by imaging depth, since the system must wait for echoes to return from the deepest structure before firing the next pulse, so deeper imaging requires a lower PRF. PRF also sets the Nyquist limit, equal to half of PRF, and pushing PRF very high to raise that limit can cause range ambiguity.
How Pulse repetition frequency Is Tested on the Registry Exam
SPI and vascular questions test that raising imaging depth lowers PRF and the Nyquist limit, while pushing PRF too high to avoid aliasing risks range ambiguity instead.
ARDMS SPI Exam Overview (2026)
Pulse repetition frequency is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.
- Questions
- 110
- Time Limit
- 2 hours
- Passing Score
- 555 (300-700)
- Test Provider
- Pearson VUE
Official SPI Content Domains
Video Lessons Covering Pulse repetition frequency
Review these related video lessons from Prepry's registry review courses.
Abdominal Imaging Optimization
Master the principles of ultrasound physics including frequency, wavelength, and attenuation to optimize abdominal imaging. Learn how to select the appropriate curvilinear or linear transducer based on patient habitus and target depth. ARDMS, ARRT, and CCI registry exam preparation.
Imaging Artifacts - Part 2
Explore equipment-related artifacts including electrical interference, transducer malfunction, and vertical dropout. Master the identification of twinkle artifact for renal calculi and understand the physics behind spectral Doppler aliasing and the Nyquist limit. ARDMS, ARRT, and CCI registry exam preparation.
Pulsed Ultrasound
Explore the five pulsed sound parameters including pulse repetition frequency, pulse duration, and spatial pulse length. Understand how imaging depth affects duty factor and why short pulses improve axial resolution for diagnostic imaging. ARDMS, ARRT, and CCI registry exam preparation.
Textbook & Clinical References
- Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.
Related Ultrasound Physics and Instrumentation Terms
View all 27 terms →Pulse repetition period
Pulse repetition period, or PRP, is the time from the start of one pulse to the start of the next, and it equals one divided by pulse repetition frequency. PRP is made up of pulse duration, the brief transmit time, plus the much longer listening time spent waiting for echoes to return. Increasing imaging depth lengthens PRP because the system must wait longer for the deepest echoes, while decreasing depth shortens it.
Read definition & exam tips →
Spatial pulse length
Spatial pulse length, or SPL, is the physical length of space that one ultrasound pulse occupies, equal to the number of cycles in the pulse multiplied by wavelength. It is set entirely by the transducer and the medium, not by the sonographer or imaging depth, and typically ranges from 0.1 to 1.0 mm clinically. SPL is the only variable that directly sets axial resolution, since axial resolution equals SPL divided by two, so fewer cycles or a shorter wavelength both shorten it.
Read definition & exam tips →
Duty factor
Duty factor is the fraction of time the transducer spends actively transmitting sound rather than listening for echoes, equal to pulse duration divided by pulse repetition period, expressed as a percentage. Pulsed imaging has a duty factor under 1 percent because most of each cycle is spent listening, while continuous wave Doppler transmits constantly and has a duty factor of 100 percent. Increasing imaging depth lengthens listening time and lowers duty factor.
Read definition & exam tips →
Damping
Damping is the reduction of ringing in a piezoelectric element after it is excited, done with a backing material bonded to the back of the crystal that absorbs excess vibration. Heavier damping shortens the pulse and spatial pulse length, which improves axial resolution and widens bandwidth, at the cost of reduced sensitivity. A detached or failing backing layer is a recognized cause of an enlarged dead zone on quality assurance testing.
Read definition & exam tips →
Q factor
Q factor, or quality factor, describes how pure a range of frequencies a transducer's pulse contains, and it equals operating frequency divided by bandwidth, so it is inversely related to bandwidth. A high Q factor means a long, narrow-bandwidth pulse, typical of an undamped continuous wave transducer. Diagnostic imaging transducers use heavy backing material to lower Q factor, which widens bandwidth and shortens the pulse for better axial resolution.
Read definition & exam tips →
Bandwidth
Bandwidth is the spread of frequencies a pulse carries instead of one pure tone, measured in Hertz as the difference between the pulse's highest and lowest frequency. Shorter, heavily damped pulses contain a wider range of frequencies and so have wider bandwidth, which goes along with a short spatial pulse length and good axial resolution. Continuous wave transducers, by contrast, have a narrow bandwidth and a high Q factor.
Read definition & exam tips →