Ultrasound Physics (ARDMS SPI)

Q factor

Definition

Q factor, or quality factor, describes how pure a range of frequencies a transducer's pulse contains, and it equals operating frequency divided by bandwidth, so it is inversely related to bandwidth. A high Q factor means a long, narrow-bandwidth pulse, typical of an undamped continuous wave transducer. Diagnostic imaging transducers use heavy backing material to lower Q factor, which widens bandwidth and shortens the pulse for better axial resolution.

How Q factor Is Tested on the Registry Exam

SPI questions connect a low Q factor to heavy damping, wide bandwidth, and improved axial resolution in imaging transducers.

ARDMS SPI Exam Overview (2026)

Q factor is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Textbook & Clinical References

Related Ultrasound Physics and Instrumentation Terms

View all 27 terms →

Bandwidth

Bandwidth is the spread of frequencies a pulse carries instead of one pure tone, measured in Hertz as the difference between the pulse's highest and lowest frequency. Shorter, heavily damped pulses contain a wider range of frequencies and so have wider bandwidth, which goes along with a short spatial pulse length and good axial resolution. Continuous wave transducers, by contrast, have a narrow bandwidth and a high Q factor.

Read definition & exam tips →

Piezoelectric effect

The piezoelectric effect is the property of certain crystals, such as lead zirconate titanate, that lets mechanical deformation from a returning echo generate an electrical signal on receive. Applying a voltage to the same crystal deforms it and produces sound on transmit, a process some textbooks call the reverse piezoelectric effect. Together these two conversions, electrical to mechanical and mechanical to electrical, let a single transducer both send and receive ultrasound.

Read definition & exam tips →

Focal zone

The focal zone is the region of the beam surrounding the focus where it is narrowest, giving the best lateral resolution available at that depth, with roughly half the zone in the distal near field and half in the proximal far field. Sonographers place it at or just below the structure of interest to sharpen lateral resolution there. Using a single focal zone rather than several also keeps frame rate, and therefore temporal resolution, higher.

Read definition & exam tips →

Near field

The near field, or Fresnel zone, is the part of the beam between the transducer face and the focus, where the beam converges and narrows. Its length grows with a larger transducer diameter or a higher frequency, which lets the focus sit deeper and can improve resolution further from the skin. Structures too shallow for a clear image can be pushed into the near field's useful range with an acoustic standoff pad.

Read definition & exam tips →

Far field

The far field, or Fraunhofer zone, is the part of the beam beyond the focus, where it diverges and spreads with increasing depth. A small, low-frequency transducer spreads the most; a large, high-frequency one spreads the least, and less spread means better lateral resolution out here. Because the beam is wider here than at the focus, lateral resolution steadily worsens the farther a structure lies past the focal zone.

Read definition & exam tips →

Time gain compensation

Time gain compensation, or TGC, also called depth gain compensation, amplifies returning echoes according to the depth they came from, boosting deeper echoes more than shallow ones to counteract attenuation. Without it, structures of equal true brightness would look progressively dimmer with depth simply because more sound was lost getting there and back. TGC lets the sonographer adjust this depth-dependent amplification to produce a uniformly bright image.

Read definition & exam tips →