Radiography & X-Ray Physics (ARRT)

Source-to-image receptor distance (SID)

Also called: SID, focal-film distance

Definition

Source-to-image receptor distance (SID) is the linear distance from the X-ray tube focal spot to the image receptor, typically standardized at 40 inches (102 cm) for most table and upright exams and 72 inches (183 cm) for chest and cervical spine radiography. Increasing SID reduces beam divergence across the anatomy, decreasing size distortion (magnification) and focal-spot blur to improve spatial resolution. Because beam intensity drops with distance according to the inverse square law, increasing SID requires a compensating increase in mAs (using the direct square law) to maintain receptor exposure.

How Source-to-image receptor distance (SID) Is Tested on the Registry Exam

ARRT questions test both the geometric benefit of increasing SID (less magnification, sharper spatial resolution) and the exposure compensation formula (mAs1 / mAs2 = SID1^2 / SID2^2).

ARRT Radiography Exam Overview (2026)

Source-to-image receptor distance (SID) is part of the core curriculum for the ARRT Radiography Certification (R.T.(R)) exam.

Full Radiography Study Guide →
Questions
230 (200 scored)
Time Limit
3 hours 50 minutes
Passing Score
75 (1-99)
Test Provider
Pearson VUE

Official Radiography Content Domains

Patient Care16.5%
Safety25%
Image Production25.5%
Procedures33%

Video Lessons Covering Source-to-image receptor distance (SID)

Review these related video lessons from Prepry's registry review courses.

Textbook & Clinical References

  • Bushong, S. C. Radiologic Science for Technologists: Physics, Biology, and Protection.

Related Radiography Physics, Image Production and Radiation Safety Terms

View all 22 terms →

Object-to-image receptor distance (OID)

Object-to-image receptor distance (OID) is the distance between the anatomic part being imaged and the image receptor. Of all geometric factors, OID has the most direct impact on magnification and focal-spot blur: as OID increases, the diverging X-rays spread further apart before striking the detector, enlarging the image and reducing sharpness. When anatomy creates an unavoidable OID (such as a lateral cervical spine), technologists compensate by increasing SID to 72 inches; the resulting air gap also allows scattered photons to miss the detector.

Read definition & exam tips →

Automatic exposure control (AEC)

Automatic exposure control (AEC) is a system of radiation detectors (typically three ionization chambers positioned between the patient and the image receptor) that measures the radiation reaching the receptor and automatically terminates the X-ray exposure once a preset air kerma threshold is reached. The technologist still selects the kVp, mA, active chamber configuration, and backup timer, while the AEC controls the exposure time. Accurate centering of the anatomy of interest directly over the active chamber is essential; if the part is off-center and primary beam strikes an uncovered chamber, the exposure terminates prematurely.

Read definition & exam tips →

Half-value layer (HVL)

Half-value layer (HVL) is the thickness of a specified absorbing material, typically millimeters of aluminum (mm Al) in diagnostic radiography, required to reduce the intensity (air kerma) of an X-ray beam to exactly half of its original value. HVL is the standard physical measurement used by medical physicists to verify X-ray beam quality (penetrability) and confirm that adequate total filtration is present. Raising kVp or adding filtration removes low-energy photons, hardening the beam and increasing its HVL.

Read definition & exam tips →

ALARA and cardinal principles of radiation protection

ALARA (As Low As Reasonably Achievable) is the foundational regulatory principle of radiation safety, requiring that every radiation exposure be kept as low as practical while still achieving diagnostic image quality. For occupational protection during fluoroscopy and mobile radiography, ALARA is implemented through three cardinal principles: minimizing exposure time, maximizing distance from the radiation source (the patient in scatter exposure), and using protective lead shielding (typically 0.5 mm lead-equivalent aprons and thyroid collars).

Read definition & exam tips →

Effective dose and annual occupational dose limits

Effective dose, measured in sieverts (Sv) or millisieverts (mSv), estimates the whole-body stochastic risk of ionizing radiation by multiplying the absorbed dose (in gray) by both the radiation weighting factor (1 for X-rays) and the tissue weighting factor for each irradiated organ's radiosensitivity. Under NCRP Report No. 116 guidelines tested on the ARRT exam, the annual occupational effective dose limit for a radiation worker is 50 mSv (5 rem) per year, the cumulative lifetime limit is 10 mSv multiplied by age in years, and the limit for a declared pregnant worker's embryo or fetus is 5 mSv (0.5 rem) for the entire gestation (0.5 mSv per month).

Read definition & exam tips →

Radiography vs. radiology

Radiography is the allied health profession and technical discipline of positioning patients, selecting exposure factors (kVp, mAs, SID, AEC), applying radiation protection (ALARA), and acquiring diagnostic medical images, performed by a registered radiologic technologist (R.T.(R)(ARRT)). Radiology is the medical specialty practiced by a licensed physician (MD or DO) who completes a four-year diagnostic radiology residency to interpret medical images, render formal diagnostic reports, and perform image-guided interventional procedures.

Read definition & exam tips →