Radiography & X-Ray Physics (ARRT)

Detective quantum efficiency (DQE)

Also called: DQE, receptor efficiency

Definition

Detective quantum efficiency (DQE) measures how effectively a digital image receptor converts incoming X-ray photons into a useful output image signal without adding extra noise, expressed as a percentage or ratio from 0 to 1. A receptor with a higher DQE can produce the same signal-to-noise ratio (image quality) at a lower patient radiation dose. Cesium iodide (CsI) indirect flat-panel detectors and amorphous selenium direct detectors generally achieve higher DQE values than computed radiography (CR) photostimulable phosphor plates.

How Detective quantum efficiency (DQE) Is Tested on the Registry Exam

ARRT Image Production questions ask which detector material provides the highest DQE and how a higher DQE allows lower patient exposure without sacrificing signal-to-noise ratio.

ARRT Radiography Exam Overview (2026)

Detective quantum efficiency (DQE) is part of the core curriculum for the ARRT Radiography Certification (R.T.(R)) exam.

Full Radiography Study Guide →
Questions
230 (200 scored)
Time Limit
3 hours 50 minutes
Passing Score
75 (1-99)
Test Provider
Pearson VUE

Official Radiography Content Domains

Patient Care16.5%
Safety25%
Image Production25.5%
Procedures33%

Textbook & Clinical References

  • Bushong, S. C. Radiologic Science for Technologists: Physics, Biology, and Protection.

Related Radiography Physics, Image Production and Radiation Safety Terms

View all 22 terms →

Inverse square law

The inverse square law states that the intensity of an X-ray beam is inversely proportional to the square of the distance from the point source. As the beam travels outward from the focal spot, the same number of photons spreads over an area that grows with the square of the distance. Doubling the distance from the source reduces radiation intensity to one-fourth of its original value, while halving the distance quadruples the intensity.

Read definition & exam tips →

Anode heel effect

The anode heel effect is the variation in X-ray beam intensity along the cathode-to-anode axis of the tube, caused by target material absorbing some of the photons emitted toward the anode side. As a result, the beam is more intense on the cathode side and up to 25 to 45 percent less intense on the anode side. The effect becomes more pronounced with smaller anode target angles, shorter source-to-image receptor distances (SID), and larger field sizes. Technologists use it clinically by placing the thicker, denser part of the anatomy under the cathode side.

Read definition & exam tips →

Line-focus principle

The line-focus principle is the geometric design of an angled X-ray tube anode target so that the actual focal spot (the area struck by electrons, which dissipates heat) remains large, while the effective focal spot projected downward toward the patient and image receptor is much smaller. Decreasing the anode target angle makes the effective focal spot smaller, improving spatial resolution, while keeping a large actual focal spot to handle high heat loads.

Read definition & exam tips →

Compton scattering

Compton scattering is an interaction in which an incoming X-ray photon strikes a loosely bound outer-shell electron in tissue, ejects that electron (a Compton recoil electron), and continues in a new direction with reduced energy as a scattered photon. Its probability depends primarily on tissue electron density rather than atomic number, and it predominates at higher diagnostic kVp levels. Scattered photons carry no useful anatomical information: those reaching the image receptor degrade contrast through fog, and those leaving the patient are the primary source of occupational radiation exposure to staff.

Read definition & exam tips →

Photoelectric effect

The photoelectric effect is an interaction in which an incident X-ray photon transfers all of its energy to a tightly bound inner-shell (typically K-shell) electron of a tissue atom, completely absorbing the photon and ejecting the electron as a photoelectron. Another electron then drops into the inner-shell vacancy, releasing low-energy characteristic radiation. The likelihood of photoelectric absorption rises sharply with the third power of the absorber's atomic number (Z^3) and falls rapidly as photon energy (kVp) increases, which is why dense bone and barium or iodine contrast agents appear bright white on radiographs.

Read definition & exam tips →

Bremsstrahlung radiation

Bremsstrahlung (German for braking) radiation is produced inside the X-ray tube when a high-speed projectile electron from the cathode passes close to the positively charged nucleus of a tungsten target atom, slows down, and changes direction. The kinetic energy lost by the decelerating electron is emitted directly as an X-ray photon. Because electrons pass at varying distances from target nuclei and lose anywhere from a tiny fraction to all of their kinetic energy, bremsstrahlung produces a continuous spectrum of photon energies up to the selected kVp, accounting for the majority of diagnostic X-ray photons.

Read definition & exam tips →