Ultrasound Physics (ARDMS SPI)

Damping

Definition

Damping is the reduction of ringing in a piezoelectric element after it is excited, done with a backing material bonded to the back of the crystal that absorbs excess vibration. Heavier damping shortens the pulse and spatial pulse length, which improves axial resolution and widens bandwidth, at the cost of reduced sensitivity. A detached or failing backing layer is a recognized cause of an enlarged dead zone on quality assurance testing.

How Damping Is Tested on the Registry Exam

SPI questions describe backing material shortening the pulse to improve axial resolution, and identify a failing damping layer as a cause of an enlarged dead zone.

ARDMS SPI Exam Overview (2026)

Damping is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Video Lessons Covering Damping

Review these related video lessons from Prepry's registry review courses.

Textbook & Clinical References

  • Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound. (p. 117)

Related Ultrasound Physics and Instrumentation Terms

View all 27 terms →

Q factor

Q factor, or quality factor, describes how pure a range of frequencies a transducer's pulse contains, and it equals operating frequency divided by bandwidth, so it is inversely related to bandwidth. A high Q factor means a long, narrow-bandwidth pulse, typical of an undamped continuous wave transducer. Diagnostic imaging transducers use heavy backing material to lower Q factor, which widens bandwidth and shortens the pulse for better axial resolution.

Read definition & exam tips →

Bandwidth

Bandwidth is the spread of frequencies a pulse carries instead of one pure tone, measured in Hertz as the difference between the pulse's highest and lowest frequency. Shorter, heavily damped pulses contain a wider range of frequencies and so have wider bandwidth, which goes along with a short spatial pulse length and good axial resolution. Continuous wave transducers, by contrast, have a narrow bandwidth and a high Q factor.

Read definition & exam tips →

Piezoelectric effect

The piezoelectric effect is the property of certain crystals, such as lead zirconate titanate, that lets mechanical deformation from a returning echo generate an electrical signal on receive. Applying a voltage to the same crystal deforms it and produces sound on transmit, a process some textbooks call the reverse piezoelectric effect. Together these two conversions, electrical to mechanical and mechanical to electrical, let a single transducer both send and receive ultrasound.

Read definition & exam tips →

Focal zone

The focal zone is the region of the beam surrounding the focus where it is narrowest, giving the best lateral resolution available at that depth, with roughly half the zone in the distal near field and half in the proximal far field. Sonographers place it at or just below the structure of interest to sharpen lateral resolution there. Using a single focal zone rather than several also keeps frame rate, and therefore temporal resolution, higher.

Read definition & exam tips →

Near field

The near field, or Fresnel zone, is the part of the beam between the transducer face and the focus, where the beam converges and narrows. Its length grows with a larger transducer diameter or a higher frequency, which lets the focus sit deeper and can improve resolution further from the skin. Structures too shallow for a clear image can be pushed into the near field's useful range with an acoustic standoff pad.

Read definition & exam tips →

Far field

The far field, or Fraunhofer zone, is the part of the beam beyond the focus, where it diverges and spreads with increasing depth. A small, low-frequency transducer spreads the most; a large, high-frequency one spreads the least, and less spread means better lateral resolution out here. Because the beam is wider here than at the focus, lateral resolution steadily worsens the farther a structure lies past the focal zone.

Read definition & exam tips →