Doppler Ultrasound (SPI & RVT)

Color Doppler

Definition

Color Doppler overlays a real-time, color-coded map of blood flow direction and mean velocity onto a grayscale image, using pulsed wave Doppler sampled at many points at once rather than the Fast Fourier Transform used for spectral display. By convention, flow toward the transducer is one color, typically red, and flow away is another, typically blue, with brighter shades showing higher mean velocity. It shares the same Nyquist limit and aliasing behavior as pulsed wave spectral Doppler.

How Color Doppler Is Tested on the Registry Exam

SPI and vascular questions test the toward-red, away-blue convention and that raising the color scale, which raises the Nyquist limit, can eliminate aliasing.

ARDMS SPI Exam Overview (2026)

Color Doppler is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Video Lessons Covering Color Doppler

Review these related video lessons from Prepry's registry review courses.

Textbook & Clinical References

  • Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.

Related Doppler and Hemodynamics Terms

View all 14 terms →

Doppler shift

Doppler shift is the difference between the frequency a transducer transmits and the frequency it receives back, caused by relative motion between the transducer and a moving reflector such as red blood cells. It is directly proportional to flow velocity and to transducer frequency, and is largest at a 0 degree angle of incidence and smallest near 90 degrees. Flow moving toward the transducer raises the received frequency, a positive shift, and flow moving away lowers it, a negative shift.

Read definition & exam tips →

Doppler angle

Doppler angle is the angle between the ultrasound beam and the direction of blood flow, and it should be kept at 60 degrees or less, and consistent between measurements, for an accurate velocity estimate. Because the Doppler equation includes the cosine of this angle, error increases sharply beyond 60 degrees, so small inconsistencies in angle correction produce large velocity errors; at 90 degrees, cosine equals zero and no shift is measured regardless of true flow. Tortuous vessels can make holding 60 degrees difficult.

Read definition & exam tips →

Nyquist limit

The Nyquist limit is the highest Doppler shift frequency that pulsed wave or color Doppler can sample and display correctly, equal to half the pulse repetition frequency. A true shift greater than this limit cannot be sampled often enough to display accurately and will alias. Because PRF is tied to depth, decreasing the depth of the sample volume raises PRF and therefore the Nyquist limit, one way to resolve aliasing at high velocities.

Read definition & exam tips →

Aliasing

Aliasing is a display error in pulsed wave and color Doppler where a true velocity exceeding the Nyquist limit is shown incorrectly, wrapping around to appear as flow in the opposite direction. On a spectral waveform the peaks above the limit appear cut off at the top and wrapped to the bottom; on color Doppler it appears as an abrupt switch from one flow color to its opposite. It can be corrected by raising PRF or lowering the baseline; continuous wave Doppler does not alias.

Read definition & exam tips →

Spectral broadening

Spectral broadening is the filling-in of the normally clear window beneath a spectral Doppler waveform, because a wide range of velocities is present in the sample volume at the same instant. It most often signals turbulent flow, such as at or just past a stenosis, but a sample volume that is too large, a Doppler angle that is too steep, or excessive spectral gain can produce it artificially without any true flow disturbance.

Read definition & exam tips →

Peak systolic velocity

Peak systolic velocity, or PSV, is the highest blood flow velocity recorded during the systolic upstroke of the cardiac cycle on a spectral Doppler waveform. Because velocity must rise as a vessel narrows to keep the same volume of flow moving through a smaller area, PSV is the primary value used to grade arterial stenosis severity, with published thresholds such as greater than 230 cm/s for a 70 percent or greater internal carotid artery stenosis under NASCET criteria.

Read definition & exam tips →