Ultrasound Physics (ARDMS SPI)

Attenuation

Definition

Attenuation is the progressive weakening of an ultrasound beam as it travels through tissue, from absorption, scattering, and reflection. In soft tissue the attenuation coefficient in dB/cm equals half the frequency in MHz, and total attenuation in decibels equals that coefficient multiplied by the path length in cm. Because the coefficient rises with frequency, higher-frequency transducers and deeper structures both lose more signal, which is why raising frequency trades penetration for resolution.

How Attenuation Is Tested on the Registry Exam

SPI questions give a frequency and depth and ask you to solve for the attenuation coefficient or the total attenuation in decibels.

ARDMS SPI Exam Overview (2026)

Attenuation is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Video Lessons Covering Attenuation

Review these related video lessons from Prepry's registry review courses.

Textbook & Clinical References

  • Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound. (p. 85)

Related Ultrasound Physics and Instrumentation Terms

View all 27 terms →

Axial resolution

Axial resolution is the ability to display two structures lying one behind the other, along the beam's path, as two separate echoes. It is determined entirely by spatial pulse length, since axial resolution equals spatial pulse length divided by two, so shorter pulses give better, smaller-number resolution. Raising frequency or damping the transducer more heavily shortens the pulse and improves it. The depth of the reflector itself has no effect on axial resolution.

Read definition & exam tips →

Lateral resolution

Lateral resolution is the ability to display two structures lying side by side, perpendicular to the beam, as two separate echoes, and it is set by the width of the ultrasound beam at a given depth. It is best at the focus, where the beam is narrowest, and worsens in the near and far fields where the beam is wider. Raising frequency and properly placing the focal zone at the depth of interest both narrow the beam and improve lateral resolution.

Read definition & exam tips →

Elevational resolution

Elevational resolution, also called slice-thickness resolution, is how well the system separates structures across the slice, the dimension at right angles to the scan plane, and it depends on how thick the beam is rather than how wide or how short the pulse is. It is fixed by the transducer's acoustic lens or elevation focus and cannot be adjusted at the console. A beam thicker than the structure being imaged pulls in echoes from outside the true plane, which can make a simple cyst appear to contain debris.

Read definition & exam tips →

Temporal resolution

Temporal resolution is how accurately a system displays motion over time, and in practice it is the frame rate: faster frame rates give better temporal resolution. Frame rate rises when pulse repetition frequency increases and falls when the system must acquire more information per frame, so increasing imaging depth, sector width, line density, or the number of focal zones all lower the frame rate and worsen temporal resolution.

Read definition & exam tips →

Frequency

Frequency is the number of complete sound wave cycles per second, measured in Hertz, and diagnostic ultrasound uses roughly 2 to 18 MHz. It is set by the transducer and stays constant as sound crosses into a new medium, unlike wavelength, which changes with propagation speed. Higher frequency shortens wavelength and improves resolution, but it also raises scattering and attenuation, which is why higher frequencies penetrate less deeply.

Read definition & exam tips →

Wavelength

Wavelength is the physical length that one complete cycle of a sound wave occupies, equal to propagation speed divided by frequency. Because frequency is fixed by the transducer, wavelength changes only when propagation speed changes, such as when sound crosses into a different medium; a faster medium stretches the wavelength and a slower one shortens it. In soft tissue, wavelength in millimeters is roughly 1.54 divided by frequency in MHz.

Read definition & exam tips →