Ultrasound Physics (ARDMS SPI)

Axial resolution

Definition

Axial resolution is the ability to display two structures lying one behind the other, along the beam's path, as two separate echoes. It is determined entirely by spatial pulse length, since axial resolution equals spatial pulse length divided by two, so shorter pulses give better, smaller-number resolution. Raising frequency or damping the transducer more heavily shortens the pulse and improves it. The depth of the reflector itself has no effect on axial resolution.

How Axial resolution Is Tested on the Registry Exam

SPI questions test that axial resolution depends only on spatial pulse length, not on how deep the reflector lies.

ARDMS SPI Exam Overview (2026)

Axial resolution is part of the core curriculum for the Sonography Principles & Instrumentation (Required for RDMS/RDCS/RVT) exam.

Full SPI Study Guide →
Questions
110
Time Limit
2 hours
Passing Score
555 (300-700)
Test Provider
Pearson VUE

Official SPI Content Domains

Perform Ultrasound Examinations23%
Manage Ultrasound Transducers7%
Optimize Sonographic Images26%
Apply Doppler Concepts34%
Provide Clinical Safety & Quality Assurance10%

Video Lessons Covering Axial resolution

Review these related video lessons from Prepry's registry review courses.

Textbook & Clinical References

  • Edelman, S. K. (2012). Understanding Ultrasound Physics. ESP Ultrasound.

Related Ultrasound Physics and Instrumentation Terms

View all 27 terms →

Lateral resolution

Lateral resolution is the ability to display two structures lying side by side, perpendicular to the beam, as two separate echoes, and it is set by the width of the ultrasound beam at a given depth. It is best at the focus, where the beam is narrowest, and worsens in the near and far fields where the beam is wider. Raising frequency and properly placing the focal zone at the depth of interest both narrow the beam and improve lateral resolution.

Read definition & exam tips →

Elevational resolution

Elevational resolution, also called slice-thickness resolution, is how well the system separates structures across the slice, the dimension at right angles to the scan plane, and it depends on how thick the beam is rather than how wide or how short the pulse is. It is fixed by the transducer's acoustic lens or elevation focus and cannot be adjusted at the console. A beam thicker than the structure being imaged pulls in echoes from outside the true plane, which can make a simple cyst appear to contain debris.

Read definition & exam tips →

Temporal resolution

Temporal resolution is how accurately a system displays motion over time, and in practice it is the frame rate: faster frame rates give better temporal resolution. Frame rate rises when pulse repetition frequency increases and falls when the system must acquire more information per frame, so increasing imaging depth, sector width, line density, or the number of focal zones all lower the frame rate and worsen temporal resolution.

Read definition & exam tips →

Frequency

Frequency is the number of complete sound wave cycles per second, measured in Hertz, and diagnostic ultrasound uses roughly 2 to 18 MHz. It is set by the transducer and stays constant as sound crosses into a new medium, unlike wavelength, which changes with propagation speed. Higher frequency shortens wavelength and improves resolution, but it also raises scattering and attenuation, which is why higher frequencies penetrate less deeply.

Read definition & exam tips →

Wavelength

Wavelength is the physical length that one complete cycle of a sound wave occupies, equal to propagation speed divided by frequency. Because frequency is fixed by the transducer, wavelength changes only when propagation speed changes, such as when sound crosses into a different medium; a faster medium stretches the wavelength and a slower one shortens it. In soft tissue, wavelength in millimeters is roughly 1.54 divided by frequency in MHz.

Read definition & exam tips →

Period

Period is the time required to complete one full cycle of a sound wave, usually measured in microseconds, and it equals one divided by frequency. Like frequency, period is fixed by the sound source and does not change when the wave enters a different medium, even though wavelength does. A 5 MHz transducer, for example, produces a period of 0.2 microseconds. Pulse repetition frequency and pulse repetition period are separate, related quantities describing how often pulses are sent.

Read definition & exam tips →